-
Rear Door Hinges
rear-door-hinges
-
Laminated Steel Square Corner Hinges
All steel hinges have double or triple laminations for greater strength. Allows for 270 degree opening. Supplied with non-removable pin for maximum security. (Removable pin also available). Available in 10 ga stainless steel.
Bracket - 8 Ga. x 5" x 5" from center of pin
Strap - 8 Ga. x 2 1/4" x 8", 12" or 16" and 19".
Pin - 1/2 Dia. steel
Finish - Zinc plated. -
Rear Door Hinges
Rear Door Hinges
(5)All steel hinges allow full 270 º opening to enable door to swing parallel with side of body. Supplied with non-removable pin for maximum security. (Removable pin also available). Universal for right or left hand doors.
-
Series 926 Heavy Duty Square Corner Strap Hinges
Features narrow bracket to allow mounting without modification. Full 270º swing to allow door to open to side of body. Made from 1/4" steel for heavy duty applications.
Bracket - 1/4" x 5-1/2" x 3"
Strap - 1/4" x 2-7/8" x 16"
Finish - Zinc Plated or grey powder coated
Weight - 7-1/4 lbs. -
Series 920 Heavy Duty Square Corner Strap Hinges
Heavy duty laminated hinge with no holes for weld on applications. Has double laminations of 1/ 4" steel for extra strength.
Bracket - 1/4" x 5-1/2" x 5"
Strap - 1/4" x 2-7/8" x 20"
Finish - Plain
Weight - 9 lbs. -
Side or Rear Door Hinges
Features narrow bracket for mounting where space is limited. Supplied with 1/2" drive pin. (Removable pin also available).
Strap - 2 laminations of 8 ga. Steel. x 1-1/2" x 8" or 12"
Pin - 1/2" dia. x 2-7/8" steel
Furnished flush to 1/2" offset. (Specify offset required)
Finish - Powder coated bracket and zinc plated leaf. -
Ramp Door Hinge
Steel hinge for ramps or heavy access doors. Plain finish for easier welding. Supplied with a grease fitting for long life & smooth operation. Brackets are 1.05 O. D. bushings 2" long, leaf is 1/4" offset and made of 1/4" steel.
Finish - Plain steel
Weight. 2.5 lbs -
All Steel Heavy Duty Hinges
For trailer and container doors fabricated with a heavy steel bushing as a pivet point for demanding applications. Available with or without mounting holes.
-
All Steel Truck and Trailer Hinges
All steel construction fabricated of 1/4" thick steel rolled to form a pivot point. Use the same heavy 5/16" thick steel bracket from the 1809 hinge.
Available in 3, 4 and no hole models with 1/2" steel boll and lock nut.
Also Available in Stainless Steel.